Sign in Subscribe

Pictorus Staff

Aircraft stabilization with Pictorus

Aircraft stabilization with Pictorus

In this blog post we're going to illustrate how to develop, deploy, and test a simple stabilization controller for a small, remotely piloted fixed-wing aircraft using Pictorus. All the hardware involved is relatively cheap and available on Amazon, and the software development and deployment is free as part

Introducing Pictorus Beta!

Engineers have been writing software to control hardware for decades, and it's always been a giant pain. They say "Hardware is Hard", but often it's the integration with software that makes developing new devices so challenging. It's because devices are finicky. They

Building an Obstacle-Avoiding Robot using Pictorus

Building an Obstacle-Avoiding Robot using Pictorus

In this post, we'll program an obstacle-avoiding robot to autonomously drive around a room. It will detect barriers by pivoting its HC SR04 ultrasonic sensor to scan nearby surroundings.

Building a DIY Thermostat with Pictorus

Building a DIY Thermostat with Pictorus

In this post, we will run through the design of a simple home automation device - a thermostat - using Pictorus. Along the way we’ll showcase a few extensible functionalities within our app including talking to sensors using the I2C protocol, building up reusable components and sensor APIs, and

Plantbot - building a plant-sustaining robot with Pictorus

Plantbot - building a plant-sustaining robot with Pictorus

In this post we’ll go over the design of a small plant sustaining robot - featuring a simple watering system that activates based on soil moisture levels. And just for fun, we'll mount the plant to a rover that drives around seeking out optimum lighting for our

Controlling a Pictorus app over UDP from Python

Controlling a Pictorus app over UDP from Python

In this blog post, we will demonstrate communication between a Pictorus motor control app, and a high-level Python controller, employing an OpenCV facial tracking algorithm leveraging an onboard camera.

Setting up a Serial Communication Interface with Pictorus

Setting up a Serial Communication Interface with Pictorus

In this post we'll demonstrate how to read radio transmitter data sent to a Raspberry Pi 4's dedicated UART interface, in order to control a Yahboom G1 Tank.